Heating and Cooling Products

Skip Navigation Links
Locate an AAON Sales Representative
[ Log In]

Quick Links

AAON Products

Air Handling Units

Condensers/Condensing Units

Related Literature:

CL Series

AAON CL Series Condensing Units set the standard for large commercial condensing units in customization, performance and serviceability. Compressors and controls are located in an isolated walk-in service compartment isolated from the airstream for easy installation and service. Available with an air-cooled condenser or high efficiency evaporative-cooled condenser CL series units are application flexible.

Air-Cooled Condenser CL Series Evaporative-Cooled Condenser CL Series CL Series Service Access Evaporative-Cooled Condenser CL Series Evaporative-Cooled Condenser Water Treatment System Evaporative-Cooled Condenser Water Sprayer
Applications
  • Air-cooled or evaporative-cooled condensing unit, from 45 - 230 tons.
  • Available as an air-source heat pump.
  • Scroll compressors are rubber isolated and housed in enclosed walk-in service compartment for quiet operation and low radiated sound.
Construction
  • Double wall rigid polyurethane foam panel cabinet construction makes the cabinet more rigid and resistant to damage and provides increased sound dampening.
  • Access doors with full length stainless steel piano hinges and quarter turn, zinc cast, lockable handles provide improved reliability over single point hinges and plastic or sheet metal handles, and make the unit easily serviceable.
  • Corrosion resistant polyurethane paint exceeds a 2,500 hour salt spray test.
Features and Options
  • Split system modulating humidity control is available to provide energy efficient dehumidification, even with low sensible heat loads, without the temperature swings common with on/off reheat systems.
  • Factory installed AAON evaporative-cooled condenser, with desuperheater air-cooled condenser and variable frequency drive controlled fans, can be 20 - 40% more energy efficient than a comparable air-cooled condenser, can use 22 - 100% less water than a conventional evaporative-cooled condenser, and require 22 - 100% less chemical usage than a conventional evaporativecooled condenser.
  • Interior of evaporative-cooled condenser is constructed of 304 stainless steel and other non-corrosive materials. De-superheater coils include polymer e-coating for corrosion protection.
  • Factory installed, microprocessor controlled, three chemical, water treatment system is standard with an evaporativecooled condenser saving installation and maintenance time and money.
  • Polymer e-coated coils are available to extend the life of the coils and protect them in corrosive environments.
Controls
  • Labeled electrical components and color-coded wiring match the unit specific color-coded wiring diagram which is laminated and permanently affixed inside the control compartment.
  • Factory provided or customer provided controller can be selected to meet existing or new building control architecture.
  • Compressors and unit controls are contained within a lighted, walk-in service compartment isolated from the air stream for ease of service and quiet operation.
  • Factory run test report, wiring diagram, and Installation, Operation, and Maintenance manual with startup form are provided in the control compartment of every unit.

 

CL
Model		 Compressors/ Circuits Discharge
Direction		 Width Height Air-Cooled
Length		 Evaporative-Cooled Length
045 4/2 or 4 Vertical 100 102 152 129
060
070
075 175 154
095
100 6/3 215 200
110
125
135
134 142 213 183
155
170
190 8/4 196 211
210
230
All dimensions are in inches

 

© Copyright AAON, All Rights Reserved. | Privacy Policy | Terms of Use | Contact Us